Aim is to be the Leading Provider of Professional Services to the Oil and Gas Sector

Tel / WeChat: +964 7714871414 / +964 7772337592
Biocide
Biocide

Biocide

Oilfield wastewater and industrial circulating cooling water contain large amounts of bacteria and algae, which can cause severe corrosion to equipment. This product is a broad-spectrum bactericide containing quaternary ammonium salts, aldehydes, organic guanidines, surfactants, and penetrants. The bactericide effectively inhibits bacterial growth, and its penetrant effectively penetrates into scale, preventing the growth and reproduction of sulfate-reducing bacteria and other bacteria, thereby reducing pitting corrosion.

Technical Specifications

Project

Indicators

Appearance

Colorless or slightly yellow, transparent liquid

Solubility

Soluble in water

Flash point

≥65℃

PH value (acidity or alkalinity)

6-8

Density

0.95-1.1 g/cm³ (20℃)

Viscosity

5-30 cp

Freezing point, ℃

≤-5

Organochlorine

0.0

 

Project

Technical parameters

Indoor Sterilization Data

Bacterial content in blank water samples, a /mL

< 10³

10³ ~ 10⁵

10⁶ ~ 10⁷

> 10⁷

(SRB) Inhibitory Concentration, mg/L

≤50

≤80

≤120

≤150

(TGB) Inhibitory Concentration, mg/L

≤50

≤80

≤120

≤150

(FB) Inhibitory Concentration, mg/L

≤50

≤80

≤120

≤150

Application Method:

Use a dosage of 50-200 ppm, employing continuous/centralized/segmented dosing methods.

Storage and Transportation:

1) This product must be stored in a well-ventilated, dry place, avoiding direct sunlight and fire sources.

2) Handle with care during transportation and handling to prevent collisions.

HSE:

During use, workers should wear personal protective equipment to protect their skin and eyes from product splashes. In case of such incidents, immediately rinse with plenty of water. If the situation is serious, seek medical attention promptly. Spilled product should be recovered as much as possible. Small amounts of product can be covered with soil or rinsed with water; rinse water should be discharged into the wastewater system.

Contact Us

Address: Ur district, Alley 325, Street 25, Building No. 152, Floor No.2, Abraj office#11, Baghdad, Iraq

E-mail: info@abraj-nl.com

Phone: +964 7714871414

Products Recommended
Copyright © All Rights Reserved Abraj Al-ufuq for general contracting and trading LLC Sitexml Powered by www.sxglpx.com